ZP2M

Dual Input/Output Wireless or Bus Expander

Expanders

ZP2M

Dual Input/Output Wireless or Bus Expander

Features

  • Dual zone inputs and dual relay outputs
  • Two garage door controller
  • 1 x 3.7V Li-ion rechargeable battery, 1000 mAh
  • Certifications: Pending

Technical Specifications

Power Input 12 VDC / 500 mA Min. (Power Pack or M console aux)
Device Input Current 200 mA Max
Power Consumption 2.4 W Max
Bus Connection M-Bus encrypted RS-485, Up to 1,000 ft
Battery 1 x 3.7V Li-ion rechargeable battery, 1000 mAh, 2 hours backup @100 mA aux.
Aux Output Supply 11 VDC, 100 mA for 2 hours
Wireless Type GFSK two-way with frequency and encryption hopping
RF Frequency 868 (865.05–867.95) MHz or 914 (902.25–927.55) MHz — might vary in different countries
RF Power 868 MHz: +14 dBm radiated; 914 MHz: +22 dBm (permitted countries)
Number of Inputs Two fully programmable zones or signaling inputs
Input Connection Type No EOL, 1EOL or Two EOL (1K ohm)
Number of Outputs Two relay outputs 30V / 1A, normally open or close, configurable
In Application Status Indication Zone open/close, Output open/close, tamper status, power available, battery level, temperature, TX/RX values, wireless or Bus connection
ZP2 Status Indication Logo: Bus or wireless, online, offline, battery or power operation, upgrade in process, tamper, zone LEDs – open/close, Output Active or not
Transmission Time Less than 20 ms
Supervision Time 20 minutes, 10 minutes (Default), and 3 minutes
Installation Environment Indoor
Firmware Upgrade Remotely via Bus or over-the-air M wireless
Operating Temperature -20°C to +50°C (-4°F to 122°F)
Battery Charging Temperature 0°C to +40°C (32°F to 104°F)
Auto Learn Yes
Colors White
Dimensions 8.7W x 6.9H x 3D cm (3.4″W x 2.7″H x 1.2″D)
Weight
Certifications CE, EN 50131-3, EN 50131-5-3, FCC 15.247, Security Grade 2 (Wireless), Grade 3 (Bus), Environmental Class II

CERTIFICATIONS

ZP2M

No certifications available for this product.